Installer richard-burns-rally-rsf-rallysimfans-rbr

description: Installs the RallySimFans version of Richard Burns Rally
game_slug: richard-burns-rally
gogslug: ''
humblestoreid: ''
installer_slug: richard-burns-rally-rsf-rallysimfans-rbr
name: Richard Burns Rally
notes: "First download the RSF Installer files from https://rallysimfans.hu/rbr/download.php?download=rsfrbr\r\
  \n\r\nYou will need a torrent client to do so, for example https://transmissionbt.com/\r\
  \n\r\nINSTALLATION:\r\nAfter downloading the files, you can run the installer and\
  \ point it to your rsf_installer_files directory\r\nIf you are planning to use the\
  \ RBR Triple Screens plugin (see details below), you can select to install that\
  \ in the RSF Installer too\r\nAfter installing the game, it is highly recommended\
  \ to install a co-driver plugin and better pacenotes.\r\nSee here: https://luppisrbr.blogspot.com/p/how-to-install-pacenotes.html\r\
  \n\r\nCONTROLLER CONFIGURATION:\r\nIf you play using a controller, you will probably\
  \ notice that by default, the game detects LT/RT (or L2/R2 on playstation) as the\
  \ same axis, meaning you can't control brake and throttle separately.\r\nTo solve\
  \ this, you should to rebind those buttons to e.g. the right stick x and y axis\
  \ as those aren't needed for anything in the game.\r\nYou can easily rebind buttons\
  \ using one of the following tools:\r\nsc-controller: https://github.com/C0rn3j/sc-controller\r\
  \ninput-remapper: https://github.com/sezanzeb/input-remapper\r\nxboxdrv: https://github.com/xboxdrv/xboxdrv\r\
  \nNOTE: In RSF Launcher, there is an option to \"Split xbox gamepad triggers\",\
  \ which in theory should solve the problem too, but this doesn't work on Linux,\
  \ so keep it off and use one of the tools mentioned above\r\n\r\nTRIPLE SCREEN SETUP:\r\
  \nFor a triple screen setup you have two good options, using Gamescope or the RBR\
  \ Triple Screens plugin.\r\nFor best performance, using Gamescope is recommended,\
  \ but will be limited in customization options.\r\nIf you have a PC with very good\
  \ specs, the Triple Screens plugin can work well too, and will offer more control\
  \ over your in-game screen behaviour.\r\nYou should use either Gamescope OR the\
  \ triple screens plugin, not both.\r\n\r\nUsing Gamescope:\r\nMake sure you are\
  \ NOT using the RBR Triple Screens plugin with this.\r\nTo use Gamescope, right\
  \ click on Richard Burns Rally in your Lutris library and go to \"Configure\" ->\
  \ \"System options\".\r\nThere in the Gamescope section, choose \"Enable Gamescope\"\
  .\r\nYou can then configure resolutions and window modes or even set those options\
  \ manually in the Custom Settings section.\r\nYour Gamescope resolution should be\
  \ the combined resolution of all your screens. For example with three 1080p (1920x1080)\
  \ displays, your Gamescope resolution should be 5760x1080\r\nExample setup (omitted\
  \ fields are empty):\r\nWindow Mode: Borderless\r\nCustom Settings: -W 5760 -H 1080\r\
  \nNOTE: With Gamescope enabled, you should expect to see some visual glitches in\
  \ RSF Launcher. If you want to configure settings in the launcher, it is recommended\
  \ to turn Gamescope off temporarily. This removes any graphical issues in the launcher.\
  \ Then open RSF Launcher and make the changes you want, close it and then turn Gamescope\
  \ on again\r\nNOTE: In RSF Launcher, go to \"Screen & Graphics\" and verify that\
  \ the Resolution matches your Gamescope resolution, for example 5760x1080. If not\
  \ already listed, you can choose \"Custom\" and type the resolution manually\r\n\
  \r\nUsing the RBR Triple Screens plugin:\r\nMake sure you are NOT using Gamescope\
  \ with this.\r\nOpen RSF Launcher and enable the \"Triple Screens\" option.\r\n\
  NOTE: In RSF Launcher, go into \"Screen & Graphics\" and verify that the resolution\
  \ matches your main (middle) monitor's resolution, for example 1920x1080\r\n\r\n\
  OTHER INFO:\r\nNOTE: Before launching the game, in the RSF Launcher go to \"Screen\
  \ & Graphics\" and there set \"Graphics mode\" to Vulkan and version to 1.2\r\n\r\
  \nNOTE: After closing the game, you will need to manually kill the game's remaining\
  \ background processes.\r\nTo do this, you can use a script with the commands to\
  \ kill any such processes. For example:\r\n#!/bin/sh\r\npkill -9 RSF_Launcher.ex\r\
  \npkill -9 explorer.exe\r\npkill -9 conhost.exe\r\npkill -9 rpcss.exe\r\npkill -9\
  \ plugplay.exe\r\npkill -9 svchost.exe\r\npkill -9 services.exe\r\npkill -9 start.exe\r\
  \npkill -9 start.exe\r\npkill -9 tabtip.exe\r\npkill -9 winedevice.exe\r\npkill\
  \ -9 wineserver\r\n\r\nFPS COUNTERS:\r\nTo display your framerate in-game, in RSF\
  \ Launcher, go to \"Screen & Graphics\" and enable \"Show FPS counter\"\r\nAlternatively,\
  \ you could enable MangoHud by right clicking on the game in your Lutris library\
  \ and going to \"Configure\" -> \"System options\" and there under the \"Display\"\
  \ section, enable \"FPS counter (MangoHud)\".\r\nNOTE: Do NOT use MangoHud with\
  \ Gamescope, it seems to cause issues. It is recommended to use the built-in FPS\
  \ counter which can be enabled from RSF Launcher"
runner: wine
script:
  files:
  - installer_file:
      filename: Rallysimfans_Installer.exe
      url: https://rallysimfans.hu/rbr/downloads/Rallysimfans_Installer/Rallysimfans_Installer.exe?0d1539425a9ee236ada7fdccac34bb0b
  game:
    exe: drive_c/Richard Burns Rally/rsf_launcher/RSF_Launcher.exe
    launch_configs:
    - exe: Rallysimfans_Installer.exe
      name: RSF Installer
    prefix: $GAMEDIR
  installer:
  - execute:
      file: installer_file
  wine:
    overrides:
      dinput8.dll: n,b
      mfc70: n
      mfc71: n
      msvci70: n
      msvcp70: n
      msvcp71: n
      msvcr70: n
      msvcr71: n
slug: richard-burns-rally-rsf-rallysimfans-rbr
steamid: null
version: RSF (rallysimfans) RBR Installer
year: 2004

{
  "game_slug": "richard-burns-rally",
  "version": "RSF (rallysimfans) RBR Installer",
  "description": "Installs the RallySimFans version of Richard Burns Rally",
  "notes": "First download the RSF Installer files from https://rallysimfans.hu/rbr/download.php?download=rsfrbr\r\n\r\nYou will need a torrent client to do so, for example https://transmissionbt.com/\r\n\r\nINSTALLATION:\r\nAfter downloading the files, you can run the installer and point it to your rsf_installer_files directory\r\nIf you are planning to use the RBR Triple Screens plugin (see details below), you can select to install that in the RSF Installer too\r\nAfter installing the game, it is highly recommended to install a co-driver plugin and better pacenotes.\r\nSee here: https://luppisrbr.blogspot.com/p/how-to-install-pacenotes.html\r\n\r\nCONTROLLER CONFIGURATION:\r\nIf you play using a controller, you will probably notice that by default, the game detects LT/RT (or L2/R2 on playstation) as the same axis, meaning you can't control brake and throttle separately.\r\nTo solve this, you should to rebind those buttons to e.g. the right stick x and y axis as those aren't needed for anything in the game.\r\nYou can easily rebind buttons using one of the following tools:\r\nsc-controller: https://github.com/C0rn3j/sc-controller\r\ninput-remapper: https://github.com/sezanzeb/input-remapper\r\nxboxdrv: https://github.com/xboxdrv/xboxdrv\r\nNOTE: In RSF Launcher, there is an option to \"Split xbox gamepad triggers\", which in theory should solve the problem too, but this doesn't work on Linux, so keep it off and use one of the tools mentioned above\r\n\r\nTRIPLE SCREEN SETUP:\r\nFor a triple screen setup you have two good options, using Gamescope or the RBR Triple Screens plugin.\r\nFor best performance, using Gamescope is recommended, but will be limited in customization options.\r\nIf you have a PC with very good specs, the Triple Screens plugin can work well too, and will offer more control over your in-game screen behaviour.\r\nYou should use either Gamescope OR the triple screens plugin, not both.\r\n\r\nUsing Gamescope:\r\nMake sure you are NOT using the RBR Triple Screens plugin with this.\r\nTo use Gamescope, right click on Richard Burns Rally in your Lutris library and go to \"Configure\" -> \"System options\".\r\nThere in the Gamescope section, choose \"Enable Gamescope\".\r\nYou can then configure resolutions and window modes or even set those options manually in the Custom Settings section.\r\nYour Gamescope resolution should be the combined resolution of all your screens. For example with three 1080p (1920x1080) displays, your Gamescope resolution should be 5760x1080\r\nExample setup (omitted fields are empty):\r\nWindow Mode: Borderless\r\nCustom Settings: -W 5760 -H 1080\r\nNOTE: With Gamescope enabled, you should expect to see some visual glitches in RSF Launcher. If you want to configure settings in the launcher, it is recommended to turn Gamescope off temporarily. This removes any graphical issues in the launcher. Then open RSF Launcher and make the changes you want, close it and then turn Gamescope on again\r\nNOTE: In RSF Launcher, go to \"Screen & Graphics\" and verify that the Resolution matches your Gamescope resolution, for example 5760x1080. If not already listed, you can choose \"Custom\" and type the resolution manually\r\n\r\nUsing the RBR Triple Screens plugin:\r\nMake sure you are NOT using Gamescope with this.\r\nOpen RSF Launcher and enable the \"Triple Screens\" option.\r\nNOTE: In RSF Launcher, go into \"Screen & Graphics\" and verify that the resolution matches your main (middle) monitor's resolution, for example 1920x1080\r\n\r\nOTHER INFO:\r\nNOTE: Before launching the game, in the RSF Launcher go to \"Screen & Graphics\" and there set \"Graphics mode\" to Vulkan and version to 1.2\r\n\r\nNOTE: After closing the game, you will need to manually kill the game's remaining background processes.\r\nTo do this, you can use a script with the commands to kill any such processes. For example:\r\n#!/bin/sh\r\npkill -9 RSF_Launcher.ex\r\npkill -9 explorer.exe\r\npkill -9 conhost.exe\r\npkill -9 rpcss.exe\r\npkill -9 plugplay.exe\r\npkill -9 svchost.exe\r\npkill -9 services.exe\r\npkill -9 start.exe\r\npkill -9 start.exe\r\npkill -9 tabtip.exe\r\npkill -9 winedevice.exe\r\npkill -9 wineserver\r\n\r\nFPS COUNTERS:\r\nTo display your framerate in-game, in RSF Launcher, go to \"Screen & Graphics\" and enable \"Show FPS counter\"\r\nAlternatively, you could enable MangoHud by right clicking on the game in your Lutris library and going to \"Configure\" -> \"System options\" and there under the \"Display\" section, enable \"FPS counter (MangoHud)\".\r\nNOTE: Do NOT use MangoHud with Gamescope, it seems to cause issues. It is recommended to use the built-in FPS counter which can be enabled from RSF Launcher",
  "name": "Richard Burns Rally",
  "year": 2004,
  "steamid": null,
  "gogslug": "",
  "humblestoreid": "",
  "runner": "wine",
  "slug": "richard-burns-rally-rsf-rallysimfans-rbr",
  "installer_slug": "richard-burns-rally-rsf-rallysimfans-rbr",
  "script": {
    "files": [
      {
        "installer_file": {
          "filename": "Rallysimfans_Installer.exe",
          "url": "https://rallysimfans.hu/rbr/downloads/Rallysimfans_Installer/Rallysimfans_Installer.exe?0d1539425a9ee236ada7fdccac34bb0b"
        }
      }
    ],
    "game": {
      "exe": "drive_c/Richard Burns Rally/rsf_launcher/RSF_Launcher.exe",
      "launch_configs": [
        {
          "exe": "Rallysimfans_Installer.exe",
          "name": "RSF Installer"
        }
      ],
      "prefix": "$GAMEDIR"
    },
    "installer": [
      {
        "execute": {
          "file": "installer_file"
        }
      }
    ],
    "wine": {
      "overrides": {
        "dinput8.dll": "n,b",
        "mfc70": "n",
        "mfc71": "n",
        "msvci70": "n",
        "msvcp70": "n",
        "msvcp71": "n",
        "msvcr70": "n",
        "msvcr71": "n"
      }
    }
  }
}